| Issue | Title | |
| Vol 2, No 1,2,3 (2019) | Analysis of Offshore Structure Having Different Bracing Pattern Using Sap2000 | Abstract |
| Neeta Chavhan, Prof.P. S. Bhalge, N. S. Vaidkar | ||
| Vol 5, No 1 (2022) | Analysis of Wind Load on High-Rise Residential Building According to BNBC | Abstract |
| Md. Kamrul Hasan Kanak, S. M. Sabbir, Raisul Islam, Fahim Khan | ||
| Vol 8, No 2 (2025) | Analytical and Experimental Investigation of the Strength Characteristics of Fiber-Reinforced Quaternary Blended Concrete (Hybrid Fibres) | Abstract |
| Mohammed Zameer Ahamed J | ||
| Vol 8, No 1 (2025) | Analyzing the Impact of Resource Allocation on Project Completion Time in the Construction Industry Using SPSS | Abstract |
| Hasara Nethmalee Nandasena, NILESHKUMAR CHIMANBHAI SONARA, J. R. Pitroda | ||
| Vol 1, No 2 (2018) | Architectural & Structural Design Considerations for Blast Resistant Building | Abstract |
| Prof. Dr. Ibrahim M. Metwally | ||
| Vol 8, No 2 (2025) | Artificial Intelligence in Recruitment: A Review on Opportunities and Challenges | Abstract |
| Rushikesh Parmar, Jayeshkumar Ramchandrabhai Pitroda, Jayesh Dayabhai Prajapati, Dr. Reshma L. Patel, Gautam Bharwad, Nisharg H. Patel | ||
| Vol 7, No 1 (2024) | Buckling behaviour of CFS Hollow Section Columns at Higher Temperatures | Abstract |
| Anumol ., Jikhil Joseph | ||
| Vol 5, No 1 (2022) | Buckling Analysis of ECC-Encased CFST Column | Abstract |
| Manila Mahesh, Parvathy U | ||
| Vol 3, No 1,2 (2020) | Comparative Study of Seismic Performance of a Multi-Storey Building with Prismatic and Non-Prismatic Beam | Abstract |
| A. A. Saudagar, Dr. R. M. Sawant | ||
| Vol 3, No 3 (2020) | Comparative Study of Static and Dynamic Seismic Analysis of Multistoried RCC Structure with and without Using Haunch Beam | Abstract |
| Darshana D. Hibare, D. H. Tupe, G. R. Gandhe | ||
| Vol 7, No 2 (2024) | COMPARATIVE STUDY OF THE BAHAVOUR OF CORRUGATED SANDWICH PLATE. | Abstract |
| NELSON TOMBRA AKARI, ODE THANKGOD, BARISUA EBENEZER NGEKPE | ||
| Vol 1, No 2 (2018) | Comparative Study on Seismic Performance among Beam-Column, Flat-Slab with Edge Beam and Flat-Plate Structure with Static Pushover Analysis | Abstract |
| Md. Mahmud Hasan Mamun, Md. Tarikul Islam, Ahammad Kabir | ||
| Vol 5, No 3 (2022) | Comparison of Axial Load on Column by Tributary Area Method and 3D Modelling by ETABS | Abstract |
| Md.Golam Rabbi | ||
| Vol 4, No 3 (2021) | Comparison of Calculated Moment Coefficients with Corresponding ACI Coefficients | Abstract |
| Mr Shahinuzzaman, Mahfujur Rahman | ||
| Vol 1, No 1 (2018) | Comparison of Results for Analysis of Composite Beams of Different Cross Sections by Finite Element Method | Abstract |
| Khan Shifa Khanam, Prof. R.D. Pandit, Dr. A.P. Wadekar | ||
| Vol 3, No 3 (2020) | Compressive Strength of Concrete Cylinder Made with Different Ratio of Recycled Aggregates and Waste Ceramic Tiles | Abstract |
| Ayesha Binta Ali | ||
| Vol 1, No 1 (2018) | Compressive strength of Sand mixed Grout for Low Volume Roads | Abstract |
| Sanket Bobade, Shrikant M. Harle | ||
| Vol 7, No 1 (2024) | Concrete Innovation for Sustainable Building: A Comprehensive Study on Steel Fiber Reinforced Recycled Aggregate Mixes | Abstract |
| Rahul Sharma, Harsh Rathore | ||
| Vol 3, No 1,2 (2020) | Concrete Jacketing using Diagonal Collars for Exterior Beam Column Joints | Abstract |
| Bindhu K. R., Tony Jose, Sivakumar S. | ||
| Vol 7, No 2 (2024) | CONTROLLED BUILDING IMPLOSION | Abstract |
| Ananya A B, Jikhil Joseph | ||
| Vol 8, No 2 (2025) | Design and Features of a Single-Story Building Model Utilizing Waste Materials | Abstract |
| Mohammed Zameer Ahamed J | ||
| Vol 5, No 3 (2022) | Design, Planning and Cost Estimation of a G+1 School Building | Abstract |
| Naveed Khan, Dr Umank Mishra, Nikhil Bajpayee | ||
| Vol 6, No 3 (2023) | Detection of Reduced Flexural Rigidity in Beam through Continuous Wavelet Transform | Abstract |
| Kanmani S S, Umesha P K, Arjun V | ||
| Vol 3, No 1,2 (2020) | Determination of Compressive Strength of Concrete via Artificial Intelligence | Abstract |
| Hussain Mehdi, Muhammad Usama Salim, Muhammad Salman Ali | ||
| Vol 5, No 1 (2022) | Developed a Relation between True and Engineering Stress – Strain for Compressibility | Abstract |
| Md. Foisal Haque | ||
| 26 - 50 of 107 Items | << < 1 2 3 4 5 > >> | |