| Issue | Title | |
| Vol 8, No 3 (2025) | Optimization, Numerical and Experimental Investigation of Performance and Emission Parameters in HCNG Fueled SI Engine | Abstract |
| Sachin I. Kadam, Vijay Kolate, K. B. Gavali | ||
| Vol 1, No 3 (2018) | Optimization of Rake Angle and Feed Rate for Better Machining Process - A Review Paper | Abstract |
| Sahebagouda Sanganagoudar, Mohammedrazeen A, Omkar Rampure, Sachin Kumbhoji | ||
| Vol 8, No 3 (2025) | Optimized Design and Analysis of the Small End of a Connecting Rod for Internal Combustion Engines | Abstract |
| Avdhut Gujar, A Awasare | ||
| Vol 9, No 2 (2026) | Performance, Combustion, and Emission Characteristics of a Single-Cylinder Diesel Engine Fuelled with Jatropha Curcas Biodiesel Blends: Experimental Investigation and Comprehensive Literature Assessment | Abstract |
| R. Panchal | ||
| Vol 9, No 1 (2026) | Piston Head Strength and Heat Dissipation in Internal Combustion Engines: A Comprehensive Review | Abstract |
| S. Kalekar | ||
| Vol 2, No 1 (2019) | Plan and Improvement of Pedal Worked Multipurpose Food Processing Unit-A Survey | Abstract |
| N. Prakash | ||
| Vol 4, No 1 (2021) | Plan and Manufacture of Groundnut Shelling and Isolating Machine | Abstract |
| Rohit Sharma | ||
| Vol 4, No 2 (2021) | Plan of Programmed Wall Putting Machine | Abstract |
| Vedika Pradhan | ||
| Vol 5, No 1 (2022) | Planning to Melodic Activities in the Channel Framework | Abstract |
| Ishita shukla | ||
| Vol 1, No 3 (2018) | Polymer Hollow Spiral Evaporative Cooling System with Peltier Effect Technology to Reduce the Health Risk | Abstract |
| Rahul Bhoyar, Animeshchandra Haldar, Swapnil. J Bhadang | ||
| Vol 3, No 2 (2020) | Potential Applications of Ejector – A Study | Abstract |
| D. K. Joshi | ||
| Vol 2, No 1 (2019) | Principles and Applications of Operations Research Techniques | Abstract |
| Pranjali R. Tete | ||
| Vol 1, No 3 (2018) | Problems with Massive Access in LTE-Advanced Networks with Machine-to-Machine Communications in Highly Dense Environments | Abstract |
| Sanjay Thakur | ||
| Vol 7, No 2 (2024) | Review of Advancements in Hydraulic Machines for Modern Engineering | Abstract |
| P. S. Gunvant | ||
| Vol 7, No 3 (2024) | Role of Concurrent Engineering in Product Development | Abstract |
| A. Awasare, S. Mulani | ||
| Vol 8, No 1 (2025) | Screw Thread Design for Enhanced Mechanical Performance | Abstract |
| V Jamadar | ||
| Vol 8, No 1 (2025) | Sensor Applications in Robotics | Abstract |
| V. Bharatidevi | ||
| Vol 9, No 1 (2026) | Smart Manufacturing: Application of Machine Learning for Process Optimization | Abstract |
| Dr. Kondekal Manjunatha | ||
| Vol 9, No 2 (2026) | Smart Solar Tracker System for Maximizing Solar Panel Efficiency | Abstract |
| Nanasaheb Shashikant Zende, Vijay Dilip Kolate, Manoj Kumar Chaudhary | ||
| Vol 1, No 2 (2018) | Snowmow System | Abstract |
| G. Aswin | ||
| Vol 9, No 2 (2026) | Steady-State Thermal Analysis and Structural Stress Evaluation of IC Engine Piston for Five Engineering Materials Using ANSYS Finite Element Analysis: Temperature Distribution, Thermal Stress, and Design Optimisation | Abstract |
| Patil Sanket T | ||
| Vol 4, No 3 (2021) | Streamlining of Inventory Total Cost Equation Considering both Shortage and Backlogging Cost by Taguchi Analysis | Abstract |
| Ritu Ghosh | ||
| Vol 1, No 1 (2018) | Study and Analysis of Stress and Strain on a Steam Turbine shaft due to Mechanical Loading– Review | Abstract |
| Sujata Deshmukh | ||
| Vol 5, No 3 (2022) | Study of Cutting Tool Wear of PVD Coated Tools in Wet Machining Process | Abstract |
| Anil Waghmode, Sanjay Pawar, Sahebagouda Sanganagoudar | ||
| Vol 5, No 2 (2022) | STUDY OF DYNAMIC RESPONSE OF THIN-WALLED ALUMINUM 6061 CANTILEVER BEAM | Abstract |
| Pranay Kumar Praharaj | ||
| 101 - 125 of 140 Items | << < 1 2 3 4 5 6 > >> | |