| Issue | Title | |
| Vol 3, No 3 (2020) | Boiling Characteristics for Water and Nanofluid on Copper Finned Surface | Abstract |
| Deepak Saini | ||
| Vol 4, No 2 (2021) | Bubbling Qualities for Water and Nanofluid on Copper Finned Surface | Abstract |
| Divya Parmar | ||
| Vol 8, No 1 (2025) | Casting Defects in Manufacturing: A Comprehensive Study | Abstract |
| Sarfaraj M | ||
| Vol 5, No 2 (2022) | CFD Analysis of Heat Exchanger Using ANSYS Fluent In Laminar Flow | Abstract |
| Bikrama Kesari Sahu, Dr Ramesh Kumar Mallik | ||
| Vol 8, No 1 (2025) | CFD Analysis on the Performance of Centrifugal Pump | Abstract |
| Walsh Christian, Bhavesh Parmar | ||
| Vol 1, No 1 (2018) | Chamomile: Legacy of Mending, Reference point of Tomorrow | Abstract |
| Sandeep Singh | ||
| Vol 6, No 1 (2023) | Computational Fluid Dynamics Analysis on Performance of Heat Transfer in Shell and Tube Heat Exchanger using Nano Fluids | Abstract |
| Shadabkhan A. Pathan, Sanjay Yadav | ||
| Vol 1, No 3 (2018) | Computational Study of Convective Heat Transfer Flow in a Square Cavity with Heated Vertical Walls and Cooled Horizontal Walls | Abstract |
| Olukayode N. E, Afolabi S. I. | ||
| Vol 2, No 2 (2019) | Consistent Sort Manual CVT for Auto to Further develop Transmission Effectiveness | Abstract |
| K. Rajesh | ||
| Vol 6, No 3 (2023) | Convective Heat Flow Analysis With a Heated Rectilinear Frame Inside a Triangular Enclosure | Abstract |
| Mohammad Abdur Rob, Mohammad Abdul Alim | ||
| Vol 7, No 1 (2024) | Deriving Continuity Equation using SymPy | Abstract |
| Pankaj Dumka | ||
| Vol 5, No 2 (2022) | Design and Analysis of Cylindrical Pressure Vessel & finding maximum Nozzle Failure Load | Abstract |
| Dr. S. G. Jadhav, Fahim Bashir Momin | ||
| Vol 4, No 2 (2021) | Design and Fabrication of Economically Feasible Abrasive Jet Machine | Abstract |
| Suyash Lengule, Shakti Sarkar, Aditya Mandwe, Ravi Pandey, Vimal Sontake | ||
| Vol 1, No 2 (2018) | Design and Fabrication of Vortex Tube | Abstract |
| M.Khaja Gulam Hussain | ||
| Vol 7, No 3 (2024) | Design and Implementation of Biogas Installation | Abstract |
| Anant Dattatray Awasare | ||
| Vol 4, No 1 (2021) | Design and Service Life of Weldments, Subjected to Both Constant Amplitude and Single Tensile Overloads | Abstract |
| Imaekhai Lawrence | ||
| Vol 2, No 1 (2019) | Design, Construction and Thermal Evaluation of a Battery Powered Portable-Sized Picnic Cooler under Different Loading Conditions | Abstract |
| Olukayode N. E, Amadu A. I., Afolabi S. I. | ||
| Vol 4, No 3 (2021) | Design of a gas turbine that gets its power from municipal solid waste, hot linseed cooking oil, and cooling from absorption refrigeration | Abstract |
| Kamaljeet Singh | ||
| Vol 4, No 2 (2021) | Design of Gas Turbine Operated by Municipal Solid Waste for Obtaining Electrical Power, Hot Linseed Cooking Oil and Cooling by Absorption Refrigeration | Abstract |
| Kamaljyoti Talukdar | ||
| Vol 8, No 3 (2025) | Development of a C Program for Thermal Gradient Calculation in Multi-Layered Solids under Steady-State Conditions | Abstract |
| Bharat Y Bhosale, Pranesh Bamankar | ||
| Vol 1, No 2 (2018) | Development of Numerical Model of Natural Convection Heat Transfer for Wire-mesh Vertical fin | Abstract |
| Abdullah F. Ansari, Meeta S. Vedpathak, Sandeep M Joshi | ||
| Vol 4, No 2 (2021) | Development of Palm Kernel Oil Coolant as an Alternative to Soluble Oil Coolant | Abstract |
| Imaekhai Lawrence | ||
| Vol 3, No 1 (2020) | Effect of Nozzle Expansion Position on Ejector performance - A Study | Abstract |
| D. K. Joshi | ||
| Vol 2, No 1 (2019) | Effectively printing text from an Android application using Bluetooth technology | Abstract |
| Ankita lath | ||
| Vol 6, No 2 (2023) | Effects of Exchange Rate Flunctuation on Entrepreneurship in Nigeria | Abstract |
| Gbolagade Adekola Sikirulahi, Oyelakin Tejumade Oluwabusayo | ||
| 26 - 50 of 125 Items | << < 1 2 3 4 5 > >> | |