|
Issue |
Title |
|
Vol 6, No 1 (2023) |
Modelling One Dimensional Steady State Heat Conduction Problem Using Monte Carlo Simulation: A Python View Point |
Abstract
|
Krishna Gajula, Yashasvini Raghuvanshi, Priyanshi Mishra, Dhananjay R. Mishra, Pankaj Dumka |
|
Vol 6, No 1 (2023) |
Molecular Dynamics Simulations of Copper Nanowires for Evaluating Mechanical Properties Under Different Loading and Ambient Conditions |
Abstract
|
Mohammad Din Al Amin, AMM Shamsul Alam, Md Alamgir Hossain |
|
Vol 5, No 1 (2022) |
Multi-Sensor based Condition Monitoring System and Evaluate the Thermal Behavior Of 3 Axis Milling Machine |
Abstract
|
Abhishek Singh, Ashok Kumar Madan, Akash Singh |
|
Vol 7, No 1 (2024) |
Optimization of Metal Inert Gas (MIG) Welding Parameters for Enhanced Weld Quality and Productivity |
Abstract
|
V. M. Jamadar, A. D. Awasare |
|
Vol 5, No 3 (2022) |
OPTIMIZING OF AVERAGE SURFACE ROUGHNESS OF AL12SI MACHINING USING MINITAB-19 |
Abstract
|
Dattatray Balu Narale, Sanjay Pawar, Sahebagouda Sanganagoudar |
|
Vol 1, No 2,3 (2018) |
Oscillating Paddle Bicycle- A Case Study |
Abstract
|
Abhishek Anand |
|
Vol 4, No 2,3 (2021) |
Over speed indication and Accident Prevention system |
Abstract
|
Yash Tale, Aniket Magdum, Narendra Pakade, Omkar Pawar, S. B. Jadhav |
|
Vol 6, No 1 (2023) |
Pedal-Powered Water Purifier |
Abstract
|
M. Srinivasa Reddy, T. Anilteja, V. Venkata Gopi, B.N. V.S. Sekhar, J.S. Sasidhar |
|
Vol 8, No 1 (2025) |
Performance Analysis of a Compression Ignition (CI) Engine Using Renewable Fuels |
Abstract
|
A Awasare |
|
Vol 7, No 3 (2024) |
Performance Evaluation of a Continuous Line Manufacturing System using Overall Equipment Effectiveness and Line Balancing |
Abstract
|
Okereke N. F., Isaac O. E, Akaninwor G. C. |
|
Vol 2, No 1,2,3 (2019) |
Performance Study of a Water Scrubber for Biogas Purification |
Abstract
|
Mohammad Sultan Mahmud, Md. Mridul Khandaker |
|
Vol 3, No 1 (2020) |
Prediction of Clapper Position and Chattering Verifiction in a Swing Check Valve using Hall Effect Sensor |
Abstract
|
Tony Punnoose Valayil, P. Boopathi, M. Raghul, V. Balaji, D. Eniyan |
|
Vol 5, No 3 (2022) |
Prediction of Localised Non-Linear Stress and Strain at the Critical Location of Mechanical Members—A Neuber’s Rule Study |
Abstract
|
Shashidhar G., Santhosh D., J. Sharana Basavaraja. |
|
Vol 1, No 2,3 (2018) |
Prediction of the Optimum Cutting Parameters of EDM Process Applied for Al-Sic Reinforced Metal Matrix Composite Using Neural Network |
Abstract
|
Hany A. Shehata, Samy J. Ebeid, A. M. Kohail |
|
Vol 1, No 2,3 (2018) |
Predictive Modeling of Surface Roughness in MQL assisted Turning of SiC-Al Alloy Composites using Artificial Neural Network and Adaptive Neuro Fuzzy Inference System |
Abstract
|
Rezaul Karim, Farhana Dilwar, Rifat Ahasan Siddique |
|
Vol 2, No 1,2,3 (2019) |
Preparation and Performance Analysis of VCR Diesel Engine Fuelled with Ricebran Biodiesel along with Methanol Additive |
Abstract
|
Dokku Srinivasarao |
|
Vol 6, No 3 (2023) |
PROGRESSION IN 3D PRINTING FAMILIES: LASER, POWDER, NOZZLE-BASED TECHNIQUES: AN OVER VIEW |
Abstract
|
Sagar K. G. |
|
Vol 2, No 1,2,3 (2019) |
Resistance Stir Processing Used in Aerospace |
Abstract
|
Harshit Gupta |
|
Vol 6, No 2 (2023) |
Review of Rotating Machinery Fault Diagnosis with Vibration Analysis |
Abstract
|
Farhan F. Mutwalli, Sandeep P. Nevagi |
|
Vol 7, No 2 (2024) |
Review on Effect of Use of Nano-Particles on Performance of Refrigeration System |
Abstract
|
Niraj N. Raja, Avinash D. Khanderao |
|
Vol 4, No 2,3 (2021) |
Review on Investigation and Optimization of Blanking Process using FEM and DOE Technique to Analyze the Influence of Process Parameters on the Burr Height |
Abstract
|
Rahul D. Shelke, Khan Naseem |
|
Vol 3, No 3 (2020) |
Review on Vertical type light weight Enlil trubine |
Abstract
|
Harshit Bhavsar, Patel Princekumar, Patel Parth, Patel Apurv |
|
Vol 6, No 3 (2023) |
Selection of Welding Method to Join AA6061 Alloy and Comparative Analysis of MIG and FSW |
Abstract
|
Ajay Anantrao Joshi, Pravin Nerkar |
|
Vol 4, No 2,3 (2021) |
Setup Time Reduction in CNC Machine |
Abstract
|
Tayyab Subhan |
|
Vol 2, No 1,2,3 (2019) |
Simulation, Measurement and Compensation of Vertical Machining Centres |
Abstract
|
Ajay Garg |
|
76 - 100 of 117 Items |
<< < 1 2 3 4 5 > >> |