Open Access Open Access  Restricted Access Subscription Access

Experimental Investigation on Flexural Behavior of Ferro-Cement Channel

Ibnul Warah, Md. Muktadir Abedin, Md. Amran Hossain

Abstract


Ferrocement is a versatile construction material characterized by its thin sections, high tensile strength, and cost-effectiveness. Precast ferrocement channels have potential applications in lightweight roofing, drainage structures, and modular components where flexural capacity is critical. This study investigates the flexural strength of precast ferrocement channel specimens under two-point loading. Specimens were cast using cement mortar (1:2 mix) reinforced with galvanized wire mesh. Experimental tests were conducted to evaluate load-deflection behavior, cracking load, ultimate load capacity, and failure modes. The findings demonstrate the suitability of ferrocement channels as an efficient alternative for lightweight structural elements.


Full Text:

PDF

References


T. C. Rao, “An Experimental Study on Ferro Cement Channel Units Under Flexural Loading,” vol. 3, no. 2, pp. 195–203, 2008.

I. G. Shaaban, Y. B. I. Shaheen, E. L. Elsayed, O. A. Kamal, and P. A. Adesina, “Case Studies in Construction Materials Flexural behaviour and theoretical prediction of lightweight ferrocement composite beams,” Case Stud. Constr. Mater., vol. 9, p. e00204, 2018, doi: 10.1016/j.cscm.2018.e00204.

J. O. Castro et al., “Guide for the Design , Construction , and Repair of Ferrocement Reported by ACI Committee 549,” vol. 93, no. Reapproved, 1999.

Bangladesh National Building Code (BNBC) -2020.


Refbacks

  • There are currently no refbacks.