Open Access Open Access  Restricted Access Subscription Access

Regression-Based Correlation of Undrained Cohesion from Unconfined Compression and Unconsolidated Undrained Triaxial Tests in Soft Clay Soils

Jim B. E., Akpila, S. B., Akpila, S. B., Jaja, G.W. T, Jaja, G.W. T

Abstract


Reliable estimation of the undrained cohesion ( ) of soft clay is central to the design of shallow foundations, embankments and excavations, yet the unconsolidated undrained (UU) triaxial test that is conventionally used to obtain it is costly, time-consuming and requires specialized equipment and skilled personnel. The unconfined compression strength (UCS) test offers a simpler and cheaper alternative, but its reliability relative to triaxial-derived  has not been quantified for soft clays of the Niger Delta. This study aimed to develop and evaluate regression models correlating  obtained from UCS tests with  obtained from UU triaxial tests for soft clay soils at three locations in Rivers State, Nigeria. Disturbed clay samples were recovered at 0.5, 1.0, 1.5, 2.0, 2.5 and 3.0 m depth from boreholes at Rivers State University (BH 1), Emohua (BH 2) and Degema (BH 3). UCS tests (ASTM D2166) and UU triaxial tests (ASTM D2850) were performed in triplicate at each depth (54 UCS specimens in total), and linear, exponential, logarithmic and power regression models were fitted between the two  data sets using Excel regression analysis. Triaxial-derived  consistently exceeded UCS-derived  at all depths and sites. The logarithmic model gave the strongest fit for BH 1 (  = 0.8382) and BH 3 (   = 0.9564), while the exponential model performed best for BH 2 (   = 0.8964). These site-specific empirical equations allow triaxial-equivalent undrained cohesion to be estimated directly from UCS results, offering a practical, economical and time-efficient alternative to routine triaxial testing for preliminary geotechnical design in similar soft clay deposits.


Full Text:

PDF

References


ASTM D2166-16 (2016). Standard Test Method for Unconfined Compressive Strength of Oil contaminated Soil. ASTM International, West Conshohocken, PA

ASTM D792-20 (2020). Standard Test Method for Density and Specific Gravity (Relative Density) of Plastics by Displacement. ASTM International, West Conshohocken, PA

ASTM D7263-21 (2021). Standard Test Method for Laboratory Determination of Density and Unit Weight of Soil Specimens. ASTM International, West Conshohocken, PA

ASTM D4959-16 (2016). Standard Test Method for Determination of Water Content of Soil by Direct Heating. ASTM International, West Conshohocken, PA

ASTM D4318-17e1 (2017). Standard Test Method for Liquid Limit, Plastic Limit, and Plasticity Index of Soils. ASTM International, West Conshohocken, PA

ASTM D6913/D6913M-17 (2025). Standard Test Method for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis. ASTM International, West Conshohocken, PA

ASTM D2850-23 (2016). Standard Test Method for Unconsolidated Undrained Triaxial Compression Test on Cohesive Soils. ASTM International, West Conshohocken, PA

Awarri, A.W., Akpila, S.B. and Jaja, G.W.T. (2022). Stability Analysis of Cement and Residue from Spent Calcium-Carbide Stabilized Cohesive Soil, Journal of Newviews in Engineering and Technology (JNET), 4(2), 29-35

Blahova, K., Sevelova, L., & Pilarova, P. (2013). Influence of Water Content on the Shear Strength Parameters of Clayey Soil in Relation to Stability Analysis of a Hillside in Brno Region. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 61(6), 1583-1588.

British Standards (B.S 1377), 1990. Methods of Test for Stabilized Soils. British Standards Institution: London, UK.


Refbacks

  • There are currently no refbacks.